************************************************* ** ** ** Last Version: Ninja V4.7 ** ** ** ************************************************* ------------------------------------------------- Version 4.7 - 19.01.2012 * new: Monitoring Interface for Enterprise Version * new: Audioconverter for Wideband codecs * new: Terminal Server Licencing and Setup Interface * new: Several Provisioning parameter have been added * changed: OTLA adjustments * changed: Audiomixer improvements * changed: GUI handler has been improved * changed: STUN detection has been improved * bugfix: Enterprise ZIP archive builder occured sometimes an error ------------------------------------------------- Version 4.6.7 - 12.01.2012 * new: New Unregister handler for TOO MANY CONTACTS * new: P-Asserted-Idendity parsing with Attended Transfer * new: SSC (Simple SIP Channel) server informations anonymized (IPs) * new: The value "PBX behind NAT/local IP" will be set automatically if a SIP server proxy address is a PRIVATE IP address * new: New SIP Server pre-configurations added (swisscom,voipgateway,3stars, net2max,swissfox,IP-Telefonibolaget,voicetrading) * changed: SIP engine ShutDown improved * changed: Several RTP stack improvements * bugfix: Settings dialog has always been shown on the display coordinates x=0/y=0 * bugfix: Pre-Configuration of Ringback value has not been set ------------------------------------------------- Version 4.6.0 - 07.01.2012 * new: Separation of SIP INFO and SIP MESSAGE delivery layer * new: sipSendUserUserMessage has been added * new: New function to enable DTMF audio stream analysis * new: SSC (Simple SIP Channel) suppts now Video connections * bugfix: ACK bugfix - 'Contact:' in reply to INVTITE requests. * bugfix: P2P communication: local IP address is now set for incoming calls also * bugfix: CANCEL-the dialog now terminates after 2 seconds, if no answer is received within the 2 seconds. ------------------------------------------------- Version 4.5.0 - 20.12.2011 * new: Terminal Server / Citrix prepared with special licenses * new: Not available Audio devices will be shown in red letters at the media settings until they are reconnected * new: If "Automatic device configuration" is disabled, the phone will not set the default audio device any longer. The new device must be set by hand or the old device must be reconnected to the system * new: SSC Server connection has been improved. Now teh phone reconnects within a few seconds also if the IP address has been changed or the connection failed packets if Discard Packet flag is set. * new: SSC (Simple SIP Channel) suppts now Video connections * changed: SRTP/TLS compatibility has beend improved (fprints) * changed: Several SIP Stack improvements * changed: Several RTP Stack improvements * changed: STUN handling has been improved * bugfix: H.264 packetization mode 0/1 encoder * bugfix: The individual ringtone has been played on the wrong audio device * bugfix: In some cases BYE has been sent wrong and the phone needed a long time to end a call * bugfix: Re-subscribe bugfix in Buddy dialog item * bugfix: The audio wizard occured an error when changing the device during playing the sound check ------------------------------------------------- Version 4.4.0 - 07.12.2011 * new: new AEC handler for excellent hands-free calls * new: 'png' messages are now sent to the outbound proxy (if provided) * new: SC Gateway reconnect: try to reconnect a broken TCP connection for max. 5 times, giving 1 sec between each tries. Also discard all outgoing packets if Discard Packet flag is set. * new: new function for sip DND * new: new global flag for g_bDND * new: new audio interface for (global) audio record callback * new: notification for application about "i=" parameter in SDP packets * new: notification for in-band DTMF tone detection * new: Start phone option in the setup * changed: Improved "received=" and "rport=" handler outgoing messages * changed: Improved auerswald pbx OPTIONS handler with incoming calls (5020) * changed: Improved RTPShutDown When 'BYE' is sent * changed: Default ping-interval changed to "20" seconds * changed: TLS/SRTP Update: default algorithm is now 'AES_CM_128_HMAC_SHA1_80' * bugfix: Audio Device handler occured exceptions in Vers. 4.3.x * bugfix: Incoming request messages with "rport" parameter set is now correctly answered * bugfix: Bugfix for P2P accounts. SDP was missing the IP address * bugfix: authorization with "stale=true" * bugfix: in some cases the contact icons were not available ------------------------------------------------- Version 4.0.1 - 12.10.2011 * new: Simple SIP Channel (SSC) for all Ninja versions * new: Peer-2-Peer encryption and video support with SSC * new: Special check for AASTRA messages on PUBLISH requests * new: Prepared for new office generation * new: New Min-expires handler with error code '423" * new: Automatic BEEP with incoming call when Auto Answer is active (Enterprise) * changed: Improved network handling * changed: Improved video codec handling * changed: Faster Audio Link for headset devices * changed: SSC message states included * changed: Update progress bar has been added with % information * changed: Jabra headset support has been improved * bugfix: Jabra connector(jabra32.exe) error when Jabra Phone suite crashs * bugfix: DTMF tone generation bugfix (inband has also sent outband) * bugfix: Redial with characters didn't worked. * bugfix: MediaCodec Shutdown * bugfix: Video on-demand didn't worked in a few cases ------------------------------------------------- Version 3.9.98 - 11.10.2011 * new: Quality of service options has been added (network settings) * new: Web Contact manager for Ninja Enterprise to automize a centralized adress-book including presence. * changed: Better reregister handling with encryption * changed: Better Error Handling 500,501 * changed: Desktop Sharing TimeOUt has been changed to 300ms * bugfix: Security form didn't worked synchron and causes in some cases wrong status information. * bugfix: No registration with blank SIP passwords. * bugfix: Redial with characters didn't worked. * bugfix: A "+" (e.g. +44) has not been set to "00" with incoming calls. * bugfix: Proxy line based Redials were not possible. * bugfix: Proxy line based dialing with TAPI has always used "Line 1" Version 3.9.92 - 3.9.97 * changed: several SIP Core improvements and solved internal engine issues. Version 3.9.91 - 26.07.2011 * changed: Improved Handling with 405 Method not allowed with Presence and BLF * changed: Improved network analysis for VLans, VPN LANs and network addresses Version 3.9.9 - 26.07.2011 * new: Enterprise Administration plattform has been simplified * new: Enterprise phone installations can branded/customized (GUI) by the Administrator now. * new: Cross plattform Engine for Linux, Android, Mac has been added * changed: Attended transfer - number of the original caller will be transfered to the transfered party now. * changed: First character after pressing a key on the keyboard will be shown in the phone display prompt. * changed: Payment count XML has been changed * changed: Redial button dials also alphanumeric Alias numbers like "Susan2" without removing characters if "is numeric" is activated * changed: H.264 IFrame handling has been improved * changed: Several TAPI improvements * bugfix: Prefix "l"+Line no, was only usable if the first SIP account was selected as default ------------------------------------------------- Version 3.9.3/8 - 02.05.2011 * changed: Audiodg.exe occured sometime high CPU loads on VISTA or Win7 OS when the phone was in IDLE mode. * changed: AudioIO interface changes: All functions are replaced by 'LPGUID'. * bugfix: Video Rendering using H.264. Fragmented areas. * bugfix: Outlook AddIn didn't worked with Outlook TAPI dialer on WIN7 32Bit systems * bugfix: CTI module occured sometimes errors with TSP 3.0.0.1 interface * bugfix: CallPickup: bugfix for PBXnSIP for localhost mode * bugfix: Fritz!Box PUBLISH bugfix - internal 408 state does not re-send any PUBLISH/SUBSCRIBE messages. ------------------------------------------------- Version 3.9.1/2 - 03.03.2011 * added: F9 - Speeddial / BLF / Presence shows now a message if no contact data are available * changed: BLF / Presence handler for pbxnsip using localhost as realm * bugfix: Outlook AddIn didn't worked with Outlook TAPI dialer on WIN7 32Bit systems * bugfix: CTI module occured sometimes errors with TSP 3.0.0.1 interface * bugfix: Negotiation of audio devices occured an error and played the Audio on the wrong device if more than 3 Audio devices were connected. * bugfix: BLF/Presence Timeout handler. No BLF or Presence states were available Version 3.9 - 25.02.2011 * added: FPS property has been added for automatic video resolution * added: Storing of the last dialed number which is also available after restarting the phone * added: A new column "Charges" has been added in the call history (must be supported by the SIP provider) * added: Body list import for contacts added * added: Custom ringtones for each SIP Proxy using URL or a local soundfile (WAV format) * added: Custom ringing melody via alert-info URL (WAV fomat, mus be support by the SIP provider) * changed: Call History - FROM decode handler for displaying the correct UTF format * changed: Several video codec aprovements for H.264 low and high end * changed: FPS "on-the-fly" changes after changing the video settings * changed: Alertbox has been changed so that all caller information are visible * changed: Presence / BLF has been improved * changed: Better random handler for callIDs to solve error 481 * changed: Depending on many user requests you can set the SIP User password via copy & paste now * bugfix: TAPI TSP driver for WIN7 32Bit wasn't available for 3rd party applications. * bugfix: Error during changing the network settings * bugfix: A leading "+" in a call history entry has not been dialed * bugfix: Video call negotiation (481) * bugfix: Video Device name had crypted characters in the audio wizard * bugfix: Contact infomation arn't shown during incoming calls if an outlook contact includes a vowel ------------------------------------------------- Version 3.8 - 26.01.2011 * added: Accept Language Support * added: Encryption via SSC Gateway * changed: Better Video and Audio paket sort handling * changed: Network detection / STUN Handler improved * changed: Display Name UTF 8 handling changed * changed: Parsing of incoming video offers improved. * bugfix: TSP Driver has been listet more than one time in the WIN telephone options ------------------------------------------------- Version 3.7 - 14.01.2011 * added: TAPI 64Bit TSP driver * added: PUBLISH 'entity=sip:...' and 'entity=pres:...' added. * added: New Multime Part Support handler * changed: The line manager now resets data when devices are initialized. * bugfix: Change to second audio device and back to primary audio device leads to 'no audio'. Now the second audio device is stopped before the devices get (re) initialized. * bugfix: Bugfix for audio device hot-swap. * bugfix: Bugfix for 'music on hold'. The music on hold is now only merged, when no line data is available for > 500ms. ------------------------------------------------- Version 3.6 - 22.12.2010 * added: Audio Engine Redesign: uses DirectSound audio instead of WAV for recording. * added: sip Get RemoteTarget adapted, so that a 'From:' in the form of 'From: sip:...;tag=...' will also be returned. * changed: Audio engine adapation. * changed: Audio device Changed / Removed improvements. * changed: Audio device close after 10 seconds of idle. * changed: Audio devices start 'on demand' - no more permanent device usage. * changed: Audio engine adapation. * changed: Answering machine modifications. * changed: Audio engine adapation. * changed: Audio engine adapation. * changed: Audio engine adapation. * bugfix: local DTMF playback via application fixed. * bugfix: presence notify bugfix. ------------------------------------------------- Version 3.5.0.5 - 18.11.2010 * added: Call History has been limited to 100 entries * added: Better H.264 compatibility with several devices like eyeBeam, Bria, Grandstream, yealink * changed: H.264 codec has been splitted in "H264 (low end)" and H264(high end) * bugfix: Outlook AddIn didn't parsed "(0)" after the country code * bugfix: Network detection / STUN Handler occured an Access violation ------------------------------------------------- Version 3.5.0.1 - 16.11.2010 * bugfix: Redial was not linked to the "Outside line" dialing rules. * bugfix: STUN Server Handler occured an Access violation ------------------------------------------------- Version 3.5 - 15.11.2010 * added: "Apply" button has been added into the settings dialog * added: Alert-Info Ringtone player * added: Video Codec list has been added in "Advanced settings" * added: AOC has been implemented * added: Remote Music On Hold * added: Multipart mime decoding support for SIP messages * added: AOC has been implemented * added: Dynamic encryption on/off implemented * added: New Audio DTMF Player * changed: Hangup in a conference call terminates all conference participants * changed: several H.264 improvments * changed: DTMF digit observer has been improved * changed: Microphone input level factor set to better default values * changed: Better SUBSCRIBE/NOTIFY RFC 3265 conformity * changed: NOTIFY parsing / expires / timeout improvments * changed: several H.264 improvment * changed: local line control (for answering machine, conference) * bugfix: Potential 'P-Asserted-Identity' notification bugfix * bugfix: Timeout while transmitting crypt key implemented * bugfix: Potential 'Call-Info:' header tag notification bugfix * bugfix: Send Initial Video Offer patch ------------------------------------------------- Version 3.4.5 - 06.11.2010 * added: Polymorphic PMC cipher implemented for Peer2Peer encryption * added: New TAPI properties for better and faster call handling * added: Encryption monitor with "Activate" and "Deactivate" function * changed: SSC RTP packet re-ordering * changed: TAPI 64Bit adapter now added for new TSP Version. * changed: Handler for IM and other Messages have been improved. * bugfix: XCTI | Hardphone Mode: Protocollhandler didn't worked. ------------------------------------------------- Version 3.4 - 18.10.2010 * added: G.729 could now also be activated in standard version. * added: H.264 implemented for video calls (not official yet). * changed: Early media has been redesigned. Handling logic improved. * changed: Encryption: Key exchange process has been adjusted for slower computers * changed: Improvments for SSC Tunnel // network handling * bugfix: Sometimes Localization failed | Outlook Add-In * bugfix: Sometimes Phone number table sync failed if Outlook folders have been deleted ------------------------------------------------- Version 3.3 - 30.09.2010 * added: Application notify sequence changed for incoming calls. * added: IPC implementation for panel usage * changed: Busy function improved * changed: TAPI dial out improvement * changed: XCTI Hardphone Mode: Faster device detection * changed: XCTI Hardphone Mode: Improved AASTRA handling * changed: Incoming ACK with SDP information improved. ------------------------------------------------- Version 3.2 - 14.09.2010 * added: Call history Action-URLs for Ninja ENterprise (ERP, CRM) * changed: Phone number detection and sync has been improved for Outlook contacts * changed: New key exchange for Peer2Peer encryption * bugfix: Skins bug fixed (Status code, Position of Add/View contect buttons) * bugfix: Call history enable/disable property ------------------------------------------------- Version 3.1 - 08.09.2010 * added: Peer2Peer Encryption has been added with AES. * added: Deffie-Hellman 4096Bit has been added. * bugfix: SIP transaction / Re-transmit has been fixed ------------------------------------------------- Version 3.0.50 - 02.09.2010 * bugfix: Local Command Sequence Number Changed ------------------------------------------------- Version 3.0.47 - 01.09.2010 ************************************************************ We have used wrong DLLs and EXE files in this setup build. Please upgrade to the latest setup. We are sorry for that! ************************************************************ * added: Application notify sequence changed. INCOMING call is now correctly delivered before and "answer-after" et. al. notifications are sent. * changed: Only use RTP packet re-ordering if tunnel is in use ------------------------------------------------- Version 3.0.46 - 31.08.2010 ************************************************************ We have used wrong DLLs and EXE files in this setup build. Please upgrade to the latest setup. We are sorry for that! ************************************************************ * bugfix: Patch to correctly answer to 'UPDATE' messages. ------------------------------------------------- Version 3.0.40 - 17.08.2010 * added: AA support for more CTI compatibility (SIP) * added: Asserted Identity support (SIP) * added: Yealink P1K und P4K support with new yealink API ------------------------------------------------- Version 3.0.38 - 11.08.2010 * added: Advanced settings -> enables you to set a timer to dial a phone number automatically * bugfix: Video codec short packets have occured a crash ------------------------------------------------- Version 3.0.37 - 10.08.2010 * changed: Presence and Busy Lamp field visualization has been improved if a SIP account is unregistering * bugfix: The reregister IP handler didn't take effect in some cases. ------------------------------------------------- Version 3.0.36 - 09.08.2010 * changed: Call Enterprise - Custom Login management has been changed (Login window). * bugfix: Jabra32.exe (Universal Driver support) has been improved. Sometimes the process didn't ended during an OS shutdown. ------------------------------------------------- Version 3.0.35 - 08.08.2010 * added: Network handling has been improved for full VPN support * changed: Register and Reregister procedures have been changed for a faster login process without STUN. * changed: PNG send mechanism has been improved * bugfix: PHandler fix for CTI module ------------------------------------------------- Version 3.0.29 - 28.07.2010 * changed: GUI Wording has been changes // Connected Line // Swedish, Russian * changed: Contact icons have been moved on the GUI (Add|Open contact) * changed: Outlook AddIn speed has been improved for O2007 * changed: Shutdown process has been changes. Sometimes Outlook 2003 was not able to close itself with regard to an Outlook "Known issue" (BMPs). * changed: The protocol handler event has been improved with regard to Win7 and IE8. Sometimes the phone received several call commands even a callto: link has only been clicked once * bugfix: SKIN handler ------------------------------------------------- Version 3.0.1 - 22.07.2010 * added: New Access URL attribute added. Is set in a transaction whenever a SIP message with AURL header tagis received. * added: Enterprise: Individual recording path has been added * added: Enterprise: Individual recoding file names are now possible * added: Outlook: Fully Office2010 (32Bit) support * added: Presence: Arcor Presence "mixed mode" model has been added * added: Automatic external IP detection as STUN alternative * added: "*" and "#"symbols can be used now as commands for classic PBX functions * changed: "#" + Proxy number has been changed to ">" + Proxy number * changed: Call History: Saving process has been changed. Calls will be saved now immediatelly. * changed: RTP Packet handler for standard UDP connections for better audio quality * changed: SIP Stack improved * changed: STUN handling has been changed * changed: SSC Tunnel Support for 32 and 64 Bit OS * changed: Volume label has been changed in the media settings to our own labels. The deliveres audio device lable are not longer used. * bugfix: Recording path "/" refers now to "APPATH/recordings" * bugfix: Mixer has been fixed regarding to mixed Audio Streams during recording * bugfix: Outgoing call: audio mixer error has been fixed with regard to mixed audio stream with external RTP audio ringtones ------------------------------------------------- Version 3.0 - 24.06.2010 * bugfix: Wrong DTMF "1,2,3" signals have been fixed * bugfix: PICKUP: Incoming calls were not shown in the SpeedDial List (RFC 3891). Button click for picking up a call has been fixed. * bugfix: SSC: RTP packet sorter has been fixed ------------------------------------------------- Version 2.9.99 - 21.05.2010 * added: Final design of tunnel sip/audio/video. * added: New interface for manual proxy overwrite * added: Auto proxy detection and usage for tunnel environment added. * added: SIPCore 'TCPTunnel' adapted to new tunnel server. * added: Audio data flow implemented. * added: Tunnel client re-design for proxy server awareness * changed: Disconnected from tunnel detection. * changed: Re-Register session expires 10 seconds before timeout. * changed: Incoming INFO messages (e.g. FAILED might have torn down the connection). * bugfix: IP address change detection - rport parameter mismatch * bugfix: IP address change after DSL port re-assignment. ------------------------------------------------- Version 2.8 - 15.04.2010 * added: Tunnel client re-design for proxy server awareness * added: New Notification codes for User-to-user messages * added: New functions to send and receive in-call information. * added: SNOM Firmware 8.x support has been added * changed: Interface for Content Typs and User Messages have been improved: * changed: Destination address calculation in case of a 'Route' is now corrected. * changed: Incoming ACK with SDP information is now evaluated. * changed: IP address check is now performed after an account accepts a message. * changed: Expire values have been modified * bugfix: Bugfix for 'hanging' audio connections - if failed to connect, the RTP connection was kept open * bugfix: Small bugfix with IP address change after DSL reconnect. * bugfix: Bugfix for trace messages: Empty STATUS transactions automaticall terminate to "COMPLETED". * bugfix: Remote On Hold was not initialized in CRTP Manager (bad, bad bug! :-). * bugfix: Bugfix in User Message - the message assignment was performed in a wrong static TString format. ------------------------------------------------- Version 2.7 - 22.02.2010 * added: OUtlook: Transfer directly to Outlook contacts * added: Outlook: Attended Transfer directly to Outlook contacts * added: New notification code in order to signal reception of INFO messages * added: New functions for managing INFO messages within a dialog * added: Improved traces for arcor conference problem. * bugfix: Bugfix for conferencing. Evaluation of "Record-Route". * bugfix: if no STUN is used and the server does not reply (e.g. incoming NOTIFY) with the complete ATTR ID, messages are discarded. * bugfix: The Request URI attribute was set to the remote contact URI in order to send the 'ACK' to the correct place. Cause: wrong request URIs. * bugfix: Since sipSendSessionPing() gets called several times a second when a call is active and video recording is not active, a 'png' message was sent each time the function gets called. Changed to: only send "png" if the session is on hold. * bugfix: Bugfix for empty STUN server causing false network errors. * bugfix: Bugfix for 'STUN not in use for an account' causing false network errors. * bugfix: Bugfix: after remote-on-hold an re-INVITE with a valid IP address and audio port is received, but no attribute is present. ------------------------------------------------- Version 2.6 - 31.01.2010 * added: Default SIP Proxy is now selectable by using the context menu * added: SIP Proxy status is now available in the context menu (Fast view) * added: Dialing Tone "Auto" detect * added: New account parameter for XCAP support * added: New Session Hold function for Remote party * added: 3CX Presence and BLF support * added: Pbxnsip Presence and BLF support * added: Trixbox BLF support * changed: Swedish language support has been improved * bugfix: Presence status has been shown even a SIP account has been deactivated * bugfix: DTMF Auto detect for inband / outband signaling ------------------------------------------------- Version 2.5.2.4 - 19.01.2010 * added: FitzBox! "Anonymous" calls are supported now also by using Displayname * added: Now you can use "*" or "**" as a prefix of a phone number in the speeddial list * added: BLF support for multiple registered SIP accounts * added: New register/reregister case handle * changed: XCAP improvements * changed: FritzBox! Full "Transfer" and "Attended Transfer" support * changed: Simple SIP Channel (SSC) improvements * bugfix: Register Dead Lock in some cases has been fixed * bugfix: DTMF Dialtone "3" has been fixed. ------------------------------------------------- Version 2.5.2.2 - 11.01.2010 * added: Setup form added ('Select' Start Mode/Brand change) * changed: DTMF Outband (RFC 2833)/Better signal timing/Transmission was sometimes to fast for some PBX. * changed: Attended Transfer/Encoding changed for better compatibility * changed: DNS handling while SIP server is changing IPs during session ------------------------------------------------- Version 2.5.2 - 05.01.2010 * added: Version label * changed: Several changes in the Core enginge for more compatibility * changed: Several Presence and BLF improvements * changed: Audio paket handling has been improved regarding to rarely delay problems ------------------------------------------------- Version 2.5.1 - 31.12.2009 * added: Audio device "Zero Touch" detection * bugfix: Sometimes the Skin Loader didn't show available skins ------------------------------------------------- Version 2.5 - 24.12.2009 * added: Simple Presence support with Ninja Pro (CTI) & Enterprise * added: Busy Lamp Feature (BLF) with Ninja Pro (CTI) & Enterprise * added: Polish language support * added: Add contact icon in call history overview for local contacts * added: Full pbxnsip support (www.pbxnsip.com) * added: Full 3CX Support (www.3cx.com) * added: Now SKINs are changeable by using the context menu * changed: New Audio Engine for better sound and compatibility * changed: More compatibility for Blind Transfer * changed: Hardphone CTI Interface has got its own Look & Feel * changed: More compatibility for Attended Transfer * changed: Graphical adjustments at the skin * changed: Several Outlook AddIn improvements * changed: UPDATER has been further improved * bugfix: SRTP Audio has been encrypted if the VoIP server supports TLS but no SRTP ------------------------------------------------- Version 2.1 - 14.09.2009 * added: Full Windows7 support * added: Encrypted telephony with the SRTP/TLS standard * added: New Outlook AddIn support for 32 & 64 Bit windows versions * added: Instantaneous detection of Outlook contacts on inbound calls * added: Outlook contact names are displayed in Ninja’s UI as well as the call history * added: Manual setting of re-register time for the telephony server * added: Hardphone CTI interface for snom and AASTRA devices enlarges the hardphone wit TAPI, Click2Dial, Outlook AddIn and Protocoll handler suppoprt * added: Dialling from within any application software using the „Pause key“ – works with SNOM/Aastra hardware as well * changed: License manager has been further improved * changed: Reregister handling has been improved * bugfix: Reregister handling after Standby * bugfix: Graphical Interface ------------------------------------------------- Version 1.9.99.8 - 26.06.2009 * added: Audio signal with entering a conference * added: Individual paths are now supported for call recording * added: PBX Dialing rules for your PBX * changed: UPDATER has been further improved * changed: "Add contact" isn't longer available for "anonymous" calls * changed: "PAUSE" key handling has been modified * changed: Speed dial handling has been changed * changed: Transfer can now be executed by pressing the RETURN key * changed: Attended Transfer can now be execuded by pressing the RETURN key * changed: License manager has been further improved * changed: Audio Playback has been improved * bugfix: Keypad dialling wasn't possible with opened Speed dialer * bugfix: STUN connect was not always successful * bugfix: Erroneous line handling without a Proxy0 SIP account * bugfix: Line manager caused a TAPI error under VISTA * bugfix: Line manager caused an error when entering a conference * bugfix: Protokollhandler caused sometimes errors ------------------------------------------------- Version 1.9.99.7 - 22.06.2009 * added : Increases efficiency of the audioio.dll * bugfix: Application shows 'Registering' or 'Network error' after some hours / Reregister problem * bugfix: In some special cases the phone occures an error with a system shutdown * bugfix: Dialing from Speeddial had a focus problem * bugfix: Hangup problem with a special kind of SIP server ------------------------------------------------- Version 1.9.99.6 - 12.06.2009 * added : New option "Busy on DND" has been added in the advanced settings * added : Show contact information depending on in- or outgoing phone calls * added : "Add/Show contact" symbols have been added in the display are with incoming calls * added : Localisation tab sheet for entering the binded country code of the SIP account * changed : "PAUSE" key for direct calling has been modified * bugfix: Register and Reregister handling ------------------------------------------------- New Version 1.9.99.4 - 27.05.2009 * added : Language support for Portuguese (Brazil) * added : Adjustment for "Kaspersky AntiVir 2009"'s proprietary Thread handling. Kaspersky has stopped Ninja since Version 8.0. * added : NEW SHORTKEY for copying a phone number from any application with the "PAUSE" key. This function is only available with Ninja Pro, Private, Call, Call Ent. after downloading a new license key from your personal account. * added : CTI interface for SNOM and Aastra has been integrated for OEM partners. * changed : Avira AntiVir has proofed Ninja. Avira has included the Ninja signature to their "positiv application" list. * changed : new handling for REREGISTER after DSL has been disconnected ------------------------------------------------- New Version 1.9.99.3 - 01.05.2009 * added : Prefix Handler for changeable SIP Acount Prefix symbols ------------------------------------------------- New Version 1.9.99.2 - 01.05.2009 * added : New Preconficuration data for AVM Fritz Box, Mobilcom Austria, Muzime Phone and other ISPs * added : "Video on Demand" setting has been included in the Preconfiguration * added : "Behind NAT / Local IP" setting has been included in the Preconfiguration * changed : Redial function * bugfix : Audio Wizard / Microphone test has occured errors * bugfix : Hangup/Busy handler has occured errors with several ISPs * bugfix : Visible "Video on Demand" label in Non-Video-Supported Versions ------------------------------------------------- New Version 1.9.99.1 - 30.04.2009 * bugfix : Hangup/Busy handler ------------------------------------------------- New Version 1.9.99 - 28.04.2009 * added : Caller Alias has been added to the Display Information * added : SSC (Simple SIP Channel) support implemented * changed : BYE hander * fixed : Timout handler for REREGISTER * fixed : Entering a phone number without a valid SIP account ------------------------------------------------- New Version 1.9.98 - 24.04.2009 * added : PC-Speaker is now supported. Plays the Ringtone as a beep wit hincoming calls. * added : Siemens HiPath compatibility * added : "Video on demand" support for several IP-PBX services / Account settings * added : BLF support has been integraded for special license keys * added : Simple presense support has been integraded for special license keys * added : Individual Recording Paths (only available with Autoprovisioning) * added : "Custom Login" - supports now "Save" option for the entered data * added : New Language support: Korean, Japanese * added : "Backup" support for Mobile USB Stick version * added : Plugg off progress support with USB Sticks version * changed : SDP Header has been adjusted regarding to AUDIO Stream Problems with sipcall * changed : SpeedDial list will only be shown if active SpeedDial contacts are available now * changed : 'BYE' command has been changed for several Gateways * changed : Video Objects for Co-Brand customers have been adjusted * changed : STUN feedback timer by using the software in critical environments * fixed : Entering a phone number wasn't possible during a TRANSFER if the SpeedDial list was open * fixed : AEC support didn't worked even it was marked as active ------------------------------------------------- New Version 1.9.97 - 10.04.2009 * fixed : some ANSII strings have been changed to UNICODE * fixed : "List index out of bounds" if you have tried to edit a new added contact ------------------------------------------------- New Version 1.9.93 - 11.02.2009 * changed : Debug handler * changed : Manual "Speed Dial" description * fixed : Cross License Importer - Last version had problems if you switch the license from "Private" to "Pro" ------------------------------------------------- New Version 1.9.92 - 11.02.2009 * added : Speed Dial List for Ninja Pro customers * added : Error message if no network device exists * added : Backup storage on USB disk devices * added : Visualized plug off progress for mobile devices * changed : Audio Wizard handling * changed : Update handling ------------------------------------------------- New Version 1.9.9 - 02.02.2009 * added : UNICODE support * added : Languages Arabic, Chinese, Russian * added : SIP Proxy | ID field for special trial version * added : XML structurs for UNICODE forms * added : Simple SIP channel support * changed : 'BYE' command has been changed for Siemens Hipath support * changed : several Provisioning functions * changed : forms: History, Contacts, MWI, BAN list, Recording * changed : MWI display handling * changed : Reregister for better Network support ------------------------------------------------- New Version: 1.9.8 - 27.01.2009 * added : Ninja2009 skin. If you prefer the classic skin please copy the Ninja.xsk file to the application folder. Click here to download the classic skin. (http://downloads.ninja-softphone.com/Skins/) * added : Easier Peer-to-Peer configuration (Proxy) * added : "Ignore SIP-Suffix" function (Advanced settings) * added : "Show Tooltips" function (Advanced settings) * added : Shortcut: 2 x Return = Redial * added : Shortcut: "end" button = Hang up * added : 10 new Provider settings (Proxy|Preselection) * changed : DTMF - "outband" has been set as default value * changed : "Line" handling has been adjusted * changed : Wording of the phone & manual * fixed : Reregister after internet connection error * fixed : Systray error | Restart during unloading Ninja * fixed : Audio-Wizard - Audio device select * fixed : Wrong phone number format with incoming TSP commands ------------------------------------------------- New Version: 1.9.1 - 10.10.2008 * added : New TAPI TSP driver includes Transfer and DTMF * added : now Arcor Business PBX is supported * fixed : Reregister after internet connection error * fixed : voicebox plays announcement twice * fixed : call history saves now the right format * fixed : account handling with incoming calls * fixed : voicebox does not start if "call waiting" is activated ------------------------------------------------- New Version: 1.8.55 - 11.09.2008 * added : Anonymous call icon in the phone display is now selectable only once for the next call * changed : Settings window has been changed for coming improvements * changed : Changed settings menu if the phone comes with one proxy * changed : Updater Version changed * changed : URI Suffix disabled * changed : Call histroy adjusted * changed : Inactivity handling of the microfon meter has been changed * changed : DTMF is now selectable - automatic/ outband / inband * fixed : G723 Bugfix for OEM Versions * fixed : sipcall.ch AUTH problem fixed * fixed : HOLD error fixed with incoming calls ------------------------------------------------- Vers. Ninja V 1.8.1 _ 25.06.2008 added - now also tel, callto, sip, sip2 protocol handler support for vista modified - uninstall isn't longer possible if the phone is still running ------------------------------------------------- Vers. Ninja V 1.8.0 _ 25.06.2008 added - OGG codec support for ringtones added - New Audio Mixer regarding to exceptions with realtime device changes added - new "anonymous" call function in proxy settings added - "anonymous" call button in display area added - realtime audio device change added - New language "dansk" included bugfix - new call on a second line with activated voicebox didn't set the active call on hold. bugfix - Ninja has fired an error after installing depending on the missing DirectX version 8.x. Before installing the setup checks now the DirectX version and gives a status message. bugfix - voicebox. the caller was able to hear the microphone input signal from the callee meanwhile he has spoken to the voicebox modified - STUN handling adjusted modified - Wizard handling now customizable modified - better audio delay handling with VISTA modified - better internal sound file handling makes it possible to reduce the size of the setup.exe to 7 MB (previously 8,6) ------------------------------------------------- Vers. Ninja V 1.7.54 _ 08.06.2008 changed - New IPC logic included for better messaging bewtween OS and other devices ------------------------------------------------- Vers. Ninja V 1.7.3 _ 30.05.2008 modified - VISTA network timeout ------------------------------------------------- Vers. Ninja V 1.7.1 _ 27.05.2008 modified - Network NAT ------------------------------------------------- Vers. Ninja V 1.7.0 _ 19.05.2008 bugfix - STUN check // sound problems with a 10 sec intervall regarding to networks without stun oder firewalls which were blocking STUN ------------------------------------------------- Vers. Ninja V 1.6.44 _ 14.05.2008 modified - "Network error" detection timeouts ------------------------------------------------- Vers. Ninja V 1.6.43 _ 09.05.2008 added - "Network error" detection message modified - Autoprovisioning Webproxy fix ------------------------------------------------- Vers. Ninja V 1.6.42 _ 07.05.2008 modified - TAPI TSP message "wrong number" ------------------------------------------------- Vers. Ninja V 1.6.41 _ 06.05.2008 modified - Video Buffer fix for Mode A & Mode B packets for better video quality ------------------------------------------------- Vers. Ninja V 1.6.40 _ 03.05.2008 modified - Audio Engine stable build for VISTA & VISTA SP1 ------------------------------------------------- Vers. Ninja V 1.6.33 _ 26.04.2008 modified - VISTA SP1 optimized / Post changed added - SIP / SDP handling changed modified - LED handling changed ------------------------------------------------- Vers. Ninja V 1.6.32 _ 20.04.2008 modified - VISTA cache optimized modified - VISTA Audio device observer optimized modified - Video ModeB packet handling adjusted modified - Setup handling adjusted. Uninstall messages if MS Outlook is running. ------------------------------------------------- Vers. Ninja V 1.6.31 _ 14.04.2008 bugfix - Autoprovisioning handler ------------------------------------------------- Vers. Ninja V 1.6.30 _ 07.04.2008 BUGFIX - VISTA network data packet transport (as described above) BUGFIX - Audio device monitoring service had caused excessive processor load and has caused poor audio quality. NEW - MWI support via "Subscribe & Notify" (e.g. for Sipgate) NEW - Memorization of voice box number in order to play back messages from the voice box of the SIP service by double-clicking at the MWI list. NEW - Recorded voice box messages get imported subsequently after they've been stored in the Ninja installation folder x:\Program Files\Ninja\Ninja\Recording . NEW - Option "Only numerical caller IDs" in "Further options". Filters caller IDs passed through CallTo, Tel, Sip to Ninja and dials solely numerical values: Examples: "069-121243324Hans" is converted into "06912124332" ------------------------------------------------- Vers. Ninja V 1.6.21 _ 27.03.2008 added - Outlook simple Call AddIn modified - Audio Device Manager Class modified ------------------------------------------------- Vers. Ninja V 1.6.2 _ 26.03.2008 added - Audio Recording is now available modified - Audio Device handling completly changed Now it's possible to change audio devices via PLUG & PLAY modified - New parameter for Autoprovisioning modified - Video RGB24 handling adjusted for ASUS and other video integrated peripherie manufacturers ------------------------------------------------- Vers. Ninja V 1.6.1 _ 12.03.2008 announced- FREE NINJA BASIC WITH VIDEO AVAILABLE added - Pre STUN config for better SIP Account handling added - Payload Header H263 codec adjustet ------------------------------------------------- Vers. Ninja V 1.6.0 _ 20.02.2008 added - Pre Video Kernel added added - Audio/Video/Bandwidth Wizard modified - Callcenter version INI can manage Ringback ------------------------------------------------- Vers. Ninja Web V 1.x _ 29.01.2008 announced- NINJA ACTIVEX and NON ACTIVEX BROWSER SUPPORT ------------------------------------------------- Vers. Ninja V 1.5.33 _ 02.01.2008 added - Ringback configuration via INI with Ninja Call modified - Windows Start function has been modified ------------------------------------------------- Vers. Ninja V 1.5.32 _ 20.12.2007 added - bluewin.ch is supported now added - New Autoprovisioning features have been integrated. fixed - License export / import has been fixed ------------------------------------------------- Vers. Ninja V 1.5.31 _ 29.11.2007 added - variuos customizing properties were added added - Call waiting can be disactivated now ------------------------------------------------- Vers. Ninja V 1.5.30 _ 28.11.2007 added - USB Headset and Handset Support for different Devices: + Plantronics CS50,60,70 + Perfectone UP-90 --> same model: IP SIP-T9CM + Volptech --> same model: Speed-Link USB (SL-8771) vPPhone Stracta - USB Modelo IPT150 Telefone USB VoIP UP-301D + YeaLink USB-P1K --> same model: Comtac 9007 tiptel 115 ConnecTec VoIP USB (PEARL) Siptronic US ROBOTICS USR809600A Hama USB 39734 Norma "simply silver" Podaci USB 1025 CallIP USB bugfix - iLBC CODEC bugfixed. Reason: Once more we had a little timing problem. iLBC works now with 13.33 kbps and has landline quality! Free codec for server usage. Take a look at http://www.ilbcfreeware.org! ------------------------------------------------- Vers. Ninja V 1.5.20 _ 20.11.2007 added - Export function for Licensing and account information included modified - IPC changed / TAPI is VISTA64 compatible now bugfix - iLBC CODEC bugfixed. Reason: With some provider we have got a bad decomprission refering to a timimng problem ------------------------------------------------- Vers. Ninja V 1.5.01 _ 08.11.2007 added - Dialing Rules integrated added - Ban list included added - Call signal can be deactivated now modified - call handling modofied - NAT handling improved modified - better display message management modified - German provider 1&1 has a 28000 sec server timeout. Sometimes there were problems with multi sessions so that the provider hold a SIP session for 8h and it was not possible to reconnect. bugfix - SIP:// & Callto:// Handles didn't worked bugfix - Individual Ringtones didn't worked modified - ************************* ** SHORTCUTS ** ************************* -- GLOBAL Shortkeys -- STRG + SHIFT + u = Focus to the Ninja phone STRG + h = Hangup -- FOCUS Shortkeys -- STRG + a = Get call STRG + Enter = Get call ------------------------------------------------- Vers. Ninja V 1.4.59 _ 30.10.2007 modified - Outlook AddIn 2.0 support modified - VIATA warn message disabled with Ninja start added - Copy & Paste function to the display area bugfix - Individual Ringtone support / Ninja doesn't play individual Ringtones ------------------------------------------------- Vers. Ninja V 1.4.5 _ 26.10.2007 bugfix - Ninja has fired sometimes an error when the remote party hangs up modified - Start with windows for "VISTA" modified - Quicker Reregister handling with disconnect ------------------------------------------------- Vers. Ninja V 1.4 _ 26.10.2007 bugfix - Windows 2000 TAPI INstaller modified - VISTA Audio handling modified - Proxy can called by "#1" out off third party applications now bugfix - RFC Hangup command modified - Network IP address handling modified - Ringcalls with innovaphone PBX ------------------------------------------------- Vers. Ninja V 1.3 _ 17.10.2007 modified - Status/Error information in the Display added - 10 ms support for different Codec ------------------------------------------------- Vers. Ninja V 1.2 _ 16.10.2007 added - TAPI Support for NINJA (W2K, XP, Vista) bugfix - iLBC Codec Fix ------------------------------------------------- Vers. Ninja V 1.2 _ 02.10.2007 modified - SKIN Enginge timing problem solved. You saw sometimes a gray skin for some seconds after starting the phone. modified - Automatical IP address resolving will only done one time after starting the phone (False). Problem was that in previous versions the phone was frozen for longer time while it was waiting for a DNS response modified - By clicking the OK Button at "SIP Proxies" the data will be stored immediatelly modified - Behind BAT/Local IP has now the default value "YES" because 90% of all user are using a router with NAT support. added - With a Provider preselection the Proxy value "Active" will be set to "YES" ------------------------------------------------- Vers. Ninja V 1.1 _ 28.09.2007 added - Language support / Spanish included added - Language support / Italian includedS bugfix - Error in Setupmaker Application was the reason that the Autorun entries were in some cases deleted (Current User). ------------------------------------------------- Vers. Ninja V 1.1 _ 27.09.2007 bugfix - KeepAlive adjustment for Behind NAT functionality bugfix - STUN Port can't be used in previous version globaliptel.mystun.net:10000 ------------------------------------------------- Vers. Ninja V 1.0 _ 17.09.2007 modified - License engine It's recommanded that you download a new key from your personal account! bugfix - Windows Shutdown error ------------------------------------------------- Vers. Ninja V 1.0 _ 12.09.2007 bugfix - Microphone and Speaker LED Skin Sometimes the LED Skins stopped ------------------------------------------------- Vers. Ninja V 1.0 _ 05.09.2007 modified - License engine ------------------------------------------------- Vers. Ninja V 1.0 _ 31.08.2007 modified - Final Release ------------------------------------------------- Vers. Ninja RC1 _ 10.07.2007_build221 added - combined RFC & Inbound DTMF signal modified - Acoustic Echo Cancellation (AEC) modified - Help PDF ------------------------------------------------- Vers. Ninja RC1 _ 04.07.2007_build218 added - callto, tel, sip, sip2 protocoll ------------------------------------------------- Vers. Ninja RC1 _ 04.07.2007 added - RC1 with X-Series basic functionality ************************************************* ** ** ** VERSION RELEASE TO NINJA SOFTPHONE ** ** ** ************************************************* ************************************************* ** ** ** Last Version: X-Phone_V2_3_x_33_TSP1_5.exe ** ** ** ************************************************* Vers. X-Phone_V2_3_x_57_TSP1_5.exe _ 20.03.2007 - Bugfix: SDP Message Header - VISTA Support implemented for Administrator ------------------------------------------------- Vers. X-Phone_V2_3_x_33_TSP1_5.exe _ 19.06.2006 - Outlook AddIn BugFix - Icoming calls format e164 didn't match (+44 123 456 789) ------------------------------------------------- Vers. X-Phone_V2_3_x_32_TSP1_5.exe _ 02.06.2006 - License Handling Bugfix - Bugfix: Callto:// Link did not changed „+“ to „00“ - Added : RFC 3966 Link call tel:// is now supported - Bugfix: Administration Mode - Added : USB Device support Dlls for Yealink (US Robotics, Siptronic, Cistrix, und andere Co Brands), BT und Volptech ------------------------------------------------- Vers. X-Phone_V2_3_x_17_TSP1_5 _ 09.05.2006 - G729 Codec Bug Fix - USB Phone Engine adjusted for DEV ------------------------------------------------- Vers. X-Phone_V2_2_134_13 _ 10.04.2006 - Volptech USB-Phone Driver included - BT USB-Phone Driver included - yealink USB-Phone driver included - USB-Manager added with "USB On Hook Minimize" - Please use the old USB phone DLLs like CyberphoneK with the Phone settings. All newer DLLs admininistrate with the USB Manager (Systray X-Pro Phone Icon) ------------------------------------------------- Vers. 2_2_1_134_ 24.01.2006 - TAPI busy signal fixed - Outlook AddIn renamed - Changed error handlin in Outlook AddIn - Administrator Mode added. Choose Admin password to disallow configurations with the Softphone Frontend - Save Profile Backup not longer in Deinstallation - Save/Load Profile Backup now in Phonecontrol "File"-> "Save current configuration" "Load configuration" ------------------------------------------------- Vers. 2_2_1_126 _ 19.01.2006 - Bugfix "Start with Windows" If you have problems to deactivate "Start with windows" please deinstall the old version and use the current one. ------------------------------------------------- Vers. 2_2_1_123 _ 13.01.2006 - French language included ------------------------------------------------- Vers. 2_2_1_122 _ 12.01.2006 - New USB Phone Support implemented with an USB Manager - "Start with Windows" Bugfix. ------------------------------------------------- Vers. 2_2_1_15 _ 06.01.2006 - User without Administrator rights can now install and use X-TAPI Administrators: Use the tspinst.exe in the Install Path to register the TSP Driver (RunAs) - Icon Bug fixed. Some systems report a ressorce overflow - 30 day TRIAL Version included ------------------------------------------------- Vers. 2_2_1_5 _ 23.12.2005 - Language handling changed - Slovak language included - New TRIAL Modes integrated - Autolicensing for Co brands integrated - Bugfix Threadhandling +Error with Deinstall +Error with softwarestart if phone is still running +Outlook Addin sometimes doesn't deinstall - New Deinstall Messages ------------------------------------------------- Vers. 2_2_1_4 _ 18.11.2005 - Show Incoming Line Call Box Option for Pro Versions added (SysTray) - Dial Rules added fro TAPI calls - Cost Routing (Regional call for TAPI) included - Digital Dialing (Trim, Prefix, Replace Options modified) - SIP URL Dialing Option dialog added - Default Proxy for TAPI Calls added - Automatic Proxy detection for TAPI calls added - Outlook AddIn added with Refresh Button - Outlook AddIn 'Close' Button activated - Message Waiting Icon included - Bugfix: Windows Shutdown, Restart fix ------------------------------------------------- Vers. 2_2_1 _ 05.10.2005 - Bugfix Administrator Messagebox information ------------------------------------------------- Vers. 2_2 _ 17.08.2005 - All Versions included in one Setup - Downloadable Languages - Major Update function included - CallTo:// protocol included // comes with TAPI version - SIP2:// protocol included // comes with TAPI version - mobile usage // All needed configurations are stored in the application path. Notify: You have to install the outlook plugin on each computer you want to use. Only if needed! - Better setup logic - All main features are reachable with the Systray menu. ************************************************* ** ** ** No officiall history for PREVIOUS VERSIONS ** ** FROM 2004 - 06/2005 ** ** ** *************************************************